The Pillar Chronicles: A History of Strong Puffs

Your sessions with wax concentrates will be changed! The Wulf Mods Pillar Mini E-Rig is known to be the world‘s 1st smart E-rig with TGT heating technology. This new Mini E-Rig has a zinc alloy body, magnetic connection, and adjustable airflow. The Pillar also features three voltage settings (3.2V, 3.7V, and 4.2V), a 10-second preheat mode, and a 30-second safety cutoff. Powered by a 1,400mAh battery, this device includes a Type-C port for fast charging.


How to Load:
First, fill water into the glass up to the water line at the top of the hole. Then, fill the concentrate into the coil. Next, attach the glass to the battery and adjust the airflow valve for the best vaping experience.


How to Start Using the Pillar:
To turn on the device, quickly press the power button five times. Afterward, to adjust the temperature, press the power button three times. Then, to initiate the preheat cycle, press the power button twice. The Mini E-Rig will preheat for 10 seconds. To power off the device, press the power button five times.

How to Charge:
Upon receiving the unit, charging it for 1.5 hours is recommended. Overcharging the battery beyond this time may damage or reduce its lifespan. You can determine that the Pillar is fully charged by checking that the LED on the button has turned off.
Troubleshooting:
White lights will flash ten times when the device continues to heat for over 15 seconds.
In case of a short circuit, the device will flash red lights five times.
If the battery is low, red lights will blink ten times to notify you.
The device will indicate this when there is no atomizer by flashing red lights three times.


What’s Included:
- (1) Wulf Pillar Kit
- (1) TGT QUAD Coil
- (1) TGT Coil
- (1) Pick Tool
- (1) Type-C USB Cable
- (1) Instruction Manual
WARNING: Do not charge with a powerbank of 5V or higher. Do not charge in your car. Do not overcharge or use any other charging cable other than what comes with your battery. Failure to follow these instructions could result in battery damage and frying of the internal system.
All orders placed via HUMANSUCKS.COM will be processed for shipment within 1-2 business days.
Please be aware that USPS does not deliver on weekends or to PO Boxes and APO.
If an order is placed on a Friday, it will be processed the following Monday. We do not guarantee arrival times for any shipments unless specifically requested.
Shipping Rates
USA
USPS Free Shipping Order > $100 3 - 7 business days Free
USPS Standard Order < $100 3 - 7 business days $5
CANADA
Standard Shipping 15 - 25 business days $19.99
EUROPE
Standard Shipping 15 - 25 business days $15.99
Express Delivery
We do offer express delivery services. Please email us via support@humansucks.com for more detail.
Notice that an additional fee would be applied when selecting express shipping
Import Customs and Taxes
Buyers are responsible for any import duties, customs, and taxes might apply. These will be due at the point of, or after delivery.
Please understand that we do not have any control for any duties, customs, and taxes laxes levied by the designated country. The cost varies according to different policies, so please contact your local customs office to get related information.
Q1: What Does It Mean If The Device Is Blinking Red Light 5 Times And Vibrating 3 Times After The Lights?
A: It means that the device is low on battery and needs to be charged.
Q2: What Does It Mean If The Device Is Blinking White Light 3 Times And Vibrating 1 Time After The Lights?
A: It means that the device has short-circuited and it’s on the short circuit protection mode. Please contact our customer services support@humansucks.com for further information.
Q3: What Does It Mean If The Device Is Blinking Yellow Light 3 Times?
A: Please check if the heating tip is properly attached to the main body.
Q4. In What Situation Should I Initialize The Device?
A: When the heating tip is not delivering the right temperature, initialization could help adjusting the electric resistance of the machine.
Q5: How To Initialize The Device?
A: Here is the initialization video:
Humansucks STINGER is always keep flavor fresh with every moment.
- Keep the product turned off
- 3 clicks the button, and long press it until you see the green light flashes
Q6: How Long Does It Take To Fully Charge The Battery?
A: Approximately 2-3 hours, the indicator light will turn to green when the device is being fully charged.
Q7: How Is The Battery Life Of The Stinger?
A: Up to 60 dabs.
Q8: How Long Is The Heat-up Duration?
A: 5 Seconds.
Q9: How To Use The Stinger?
A: Here is the how-to-use video: How to use Humansucks STINGER
- 5 clicks to turn it on
- 3 clicks for temperature adjustment, there are 4 temperature settings in total.
- Wait for 5 seconds for the pre-heat and LONG PRESS the button while you dab
Q10: How To Clean The Stinger?
A: If you have used the product multiple times before, it might cause a blockage in the airpath. Please unscrew all parts and use the Q-tips in the box to clean the airpath before your next use. Please also make sure the product is turned off at all times during the cleaning.
Q11: How Long Does It Take To Ship My Item After Placing The Order?
A: Within one business day after the order is placed.
Q12: How To Track My Item?
A: You will receive an email with the delivery status and tracking number once your items have been shipped. You could track your package in the email or use the tracking number it provides to track the shipment status. Here's the USPS website for you to track the package: USPS Tracking
Q13: How Long Is The Warranty Of My items?
A: The warranty of all our products is ONE year.
NOTE: Please always keep in mind, DO NOT allow water into the middle chamber. There should not be any water in the airpath or heating tips.